Microcote HPU

Microcote coatings are a premium two component, very low VOC, virtually odourless, high performance, water-based, water reducible, UV stable, non-yellowing aliphatic acrylic polyurethane protective coating.

They are highly versatile and hard wearing providing extremely durable moisture, stain, chemical and abrasion resistant protection on almost any vertical and horizontal surface, including floors.

Microcote HPU is ideal for sealing and restoring concrete, terrazzo, tile, stone, timber, resilient, epoxy and previously coated floors subjected to heavy pedestrian and light vehicle traffic. Protects against contamination of porous surfaces and resists moisture, chemicals and intensive cleaning.

  • Restore factory applied wear surface to engineered timber, vinyl, LVT and other PU coated surfaces.

  • Rejuvenate ceramic, porcelain and stone and provide hygienic protection for grout lines on floors and walls.

  • Seal or colour concrete floors in corridors, kitchens, warehouses, hospitality and retail, including safety line marking, logos and lettering.

  • Seal and protect terrazzo, epoxy, rubber, linoleum, timber, plaster and other wall and floor finishes.

  • Recolour laminates, fibreglass, vinyl and almost any hard to coat substrate.

Microcote Anti-slip

Microcote coatings are a premium two component, very low VOC, virtually odourless, high performance, water-based, water reducible, UV stable, non-yellowing aliphatic acrylic polyurethane protective coating.

Microcote Anti-Slip is ideal for restoring or enhancing floor friction on almost any surface to improve safety and compliance.  P3, P4 & P5 slip ratings can be achieved on most surfaces with a range of additives that allow for a balance to be achieved between compliance and cleanability.

  • Suitable for high pedestrian traffic in foyers, corridors, retail, hospitality, warehouse and industrial applications.

  • Up to P5 slip rating in ensuites, toilets, wet areas, kitchens and almost anywhere enhanced slip resistance is required.

  • Internal and external applications in clear and colour.

  • Mix in Griplok additives for a one coat application.

  • Safety colours for anti-slip line and zone marking.

Microcote Antimicrobial

Microcote coatings are a premium two component, very low VOC, virtually odourless, high performance, water-based, water reducible, UV stable, non-yellowing aliphatic acrylic polyurethane protective coating.

Microcote Antimicrobial is ideal for areas subject to intensive cleaning, moisture, staining or microbial control.

  • Defends against microbial attack and biofilm formation for the life of the coating.

  • Broad spectrum antimicrobial protection kills 99.99% of bacteria.

  • Inhibits mould and odour.

  • Seals and protects porous surfaces creating hygienic, easy clean surface.

  • Very durable moisture, stain and abrasion protection.

  • Chemical and stain resistant.

  • Suitable for wet, sterile and food preparation areas.

  • Direct application (no primer) to most surfaces including floors.